I-Nickel alloys Manual electrode ENiCu-7 idatha yokuSoldering
INXENYE YECHEMICAL:
I-ALLOY(wt%) | C | Mn | Si | Ni | Fe | Ti | Cu | P | S |
GB/T IMIGAQO | 0.15 | 4.00 | 1.50 | ≥62 | 2.50 | 1.00 | 27-34 | 0.02 | 0.015 |
I-AWS IMIGAQO | 0.15 | 4.00 | 1.50 | 62-69 | 2.50 | 1.00 | Umda | 0.02 | 0.015 |
UMZEKELO IXABISO | 0.021 | 3.3 | 0.83 | 67.4 | 0.5 | 0.42 | 27.3 | 0.009 | 0.007 |
IPROPATI YOOMATSHINI:
IPROPATI | IZIVUNO ZAMANDLA (MPa) | UKWANDISA AMANDLA (MPa) | IXABISO LE-IMAPACT J/℃ | UBUDE(%) | ||||
GB/T IMIGAQO | 200 | 480 | - | 27 | ||||
I-AWS IMIGAQO | - | 480 | - | 30 | ||||
UMZEKELO IXABISO | 360 | 485 | - | 39.5 |
IZIQINISEKISO ZOKUSHISA IZIQULATHO:
INGCACISO YEDIAMETERS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | |||||||
UMBANE (Amp) | H/W | 65-95 | 70-115 | 95-145 |
I-electrode ephantsi yohlobo lwe-hydrogen yesandla, ukubunjwa kwegama (ipesenti yobunzima) yi-66Ni-30Cu-3Mn-1Fe, ye-nickel-copper alloy electrode.
Ngenxa yesixa esifanelekileyo seMn kunye neTi sinokunqanda ngokufanelekileyo ukuveliswa kweentanda ze-thermal kunye neepores.
I-arc ezinzileyo, ukubunjwa okuhle, i-splash encinci, ukususwa kwe-slag lula, ukuchasana kakuhle kwe-porosity, iimpawu zomatshini zetsimbi ezityhidiweyo zizinzile.
-
Inner Mongolia Xinao Energy Co., LTD. 3*3000m³ itanki engqukuva yobushushu obuphantsi
-
Izinto zokuwelda kwizikhongozeli
-
Iqonga le-3000m lamanzi anzulu angaphantsi kwamanzi okugrumba "Haiyang Shiyou 981"
INXENYE YECHEMICAL:
I-ALLOY(wt%) | C | Mn | Si | Ni | Fe | Ti | Cu | P | S |
GB/T IMIGAQO | 0.15 | 4.00 | 1.50 | ≥62 | 2.50 | 1.00 | 27-34 | 0.02 | 0.015 |
I-AWS IMIGAQO | 0.15 | 4.00 | 1.50 | 62-69 | 2.50 | 1.00 | Umda | 0.02 | 0.015 |
UMZEKELO IXABISO | 0.021 | 3.3 | 0.83 | 67.4 | 0.5 | 0.42 | 27.3 | 0.009 | 0.007 |
IPROPATI YOOMATSHINI:
IPROPATI | IZIVUNO ZAMANDLA (MPa) | UKWANDISA AMANDLA (MPa) | IXABISO LE-IMAPACT J/℃ | UBUDE(%) | ||||
GB/T IMIGAQO | 200 | 480 | - | 27 | ||||
I-AWS IMIGAQO | - | 480 | - | 30 | ||||
UMZEKELO IXABISO | 360 | 485 | - | 39.5 |
IZIQINISEKISO ZOKUSHISA IZIQULATHO:
INGCACISO YEDIAMETERS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | |||||||
UMBANE (Amp) | H/W | 65-95 | 70-115 | 95-145 |